3D Ford Probe keychain

To support transnational "ProbeUnity" - English discussions only - any topics.
Gast

3D Ford Probe keychain

Beitrag von Gast »

Dear Probers,

I'm now clearly engaged in a process to make this kind of thing being produced :

Bild

This item currently exists for several cars, but not the Probe. It is based on a 1/87 Busch model such as displayed on a pic posted some hours ago ("Probe Model" thread).

As you can see, it's quite a beautiful & shiny item, with some operations being done by hand. It can be delivered in silver or golden finish (colour speaking, not true silver/gold metal).
I've got a contact with the manufacturer who propose me to get them for 15 to 20 euros (depending on the quantity being ordered).
As this item doesn't exist now, it will require around 3 months to be produced. It will not be available for Xmas this year, but it should be Ok during spring.

Here's my problem : some of us (french Probe club) expressed their interest in the minutes following the time I posted the info on our forum ... but I'm quite sure that this will not give a sufficient number if we are alone.

Are you interested in such an item ?
Gast

Re: 3D Ford Probe keychain

Beitrag von Gast »

whoa phätt! :lol:

probe 1 or 2? or both? :D

daniel
Gast

Beitrag von Gast »

I was thinking about the 2nd gen as we will need to get sufficient orders for one model ... and as I've got one ... :lol:

But, if a 1/87 model exists for a 1st gen Probe (does it ?), it will be possible to get the same thing for it ... in case of sufficient orders ... :P

I've already contacted the Probe fellows I know around Europe to get it sorted out ... The more people express their interest in it, the more chance we will get it ! :wink:
Benutzeravatar
BM50181
Site Admin
Site Admin
Beiträge: 5407
Registriert: 18.07.2002, 22:13
Probe-Modell: Probe II 24V ECP
FIN-10: T
Wohnort: Elsdorf
Kontaktdaten:

Beitrag von BM50181 »

Hi Yann !

I write short, because my english is very very bad... :oops:

This is a good idea. I will buy one !!! (2nd gen)

Micha
VG
Micha
ProberRudi
Donating Member
Donating Member
Beiträge: 241
Registriert: 09.11.2003, 20:15
Probe-Modell: Probe II 24V ECP
Wohnort: Groitzsch bei Leipzig

Beitrag von ProberRudi »

And the price??????
Klarglas Seitenblinker/V6 Zeichen vom Cougar unter Seitenblinkern/SchreiterTuning Heckspoiler/Ami Sport ESD/K.A.W. 50/35/lackierte Mittelkonsole/
Seitenleisten entfernt/97er US Rückleuchten/Probe des Monats Mai 05/ Totalschaden
Benutzeravatar
BM50181
Site Admin
Site Admin
Beiträge: 5407
Registriert: 18.07.2002, 22:13
Probe-Modell: Probe II 24V ECP
FIN-10: T
Wohnort: Elsdorf
Kontaktdaten:

Re: 3D Ford Probe keychain

Beitrag von BM50181 »

@Rudi
Yann hat geschrieben:...I've got a contact with the manufacturer who propose me to get them for 15 to 20 euros (depending on the quantity being ordered)....
:wink:
VG
Micha
Benutzeravatar
Hellspawn
Donating Member
Donating Member
Beiträge: 3565
Registriert: 30.07.2002, 18:58
Probe-Modell: Probe II 24V ECP
FIN-10: V
Wohnort: Darmstadt

Beitrag von Hellspawn »

My dad once had one of his old 3er BMW, made by a Dentist from pure Silver, but with windows and the original model Wheels.
It looked great, but the problem would be, that you have to have one Model for each Item you make.
And it was a Herpa or Wicking, I think, which are much more detailed than the Busch Cars.

But I would take one as well!

But I think a finished Prototype would be usefull to see the final Quality
Olli-05
Donating Member
Donating Member
Beiträge: 17
Registriert: 10.11.2003, 01:10
Probe-Modell: Probe II 24V ECP
Wohnort: Solingen

Hello Yann !

Beitrag von Olli-05 »

I also like to take 2 pieces in silver !

Please pass the information if you need a advanced payment

or which handling you prefer!

Best regards

Olaf
Benutzeravatar
RedEagle
Donating Member
Donating Member
Beiträge: 337
Registriert: 02.03.2003, 11:01
Probe-Modell: Probe II 24V T22
FIN-10: T
Wohnort: 40223 Düsseldorf

Beitrag von RedEagle »

Hi Yann !

A great idea. If the item will be manufactured, I'll buy two pieces.

Uwe
Benutzeravatar
Shoobedoo
Donating Member
Donating Member
Beiträge: 4349
Registriert: 23.09.2003, 14:27
Probe-Modell: Probe II 24V T22
FIN-10: P
Wohnort: Schleswig-Holstein
Kontaktdaten:

Beitrag von Shoobedoo »

Hi Yann,

nice accessoire :)
I will buy two items too, when available.

Best regards
Shoo
Gast

Some good news !

Beitrag von Gast »

I'm not sure if it will be based on Busch, Herpa or Wicking ... As it seems to be an issue shared by some people across the various Probe forums, I'll ask the manufacturer about it and post the answer as soon as possible.

The good news is that I've now a sufficient number of pre-orders to start the production. Items will be available in February ... as the first ones ever produced ... a kind of pre-series collector !!! :twisted:
Benutzeravatar
Yvonne
Donating Member
Donating Member
Beiträge: 424
Registriert: 22.07.2002, 08:57
Probe-Modell: Probe II 16V ECP
FIN-10: S
Wohnort: Ratingen

Re: Some good news !

Beitrag von Yvonne »

Hi Yann,

if it´s not too late yet... a silver one for me please!

Yvonne
Gast

Re: Some good news !

Beitrag von Gast »

Yvonne hat geschrieben:if it´s not too late yet...
No, it's not too late at all ... I was just looking to get feedback before to launch the production. Clearly, there's a market for it ... but first items will not be delivered before february.

So please be a little bit patient, but continue to pre-order to be sure to get one ! :wink:
Gast

Beitrag von Gast »

One for me, too!

:thumb: Good idea!
Chiefhunter
Donating Member
Donating Member
Beiträge: 432
Registriert: 18.07.2002, 23:35
Probe-Modell: Probe II 24V ECP
Wohnort: 78564 Wehingen

Beitrag von Chiefhunter »

OOps, wasnt logged in.

One for me, too!

Good idea!
Antworten